Vacuum induction melting furnace is one of the most widely used equipments in vacuum metallurgy field. It has been proved that a considerable proportion of the alloys and special steels needed by aerospace, missile, rocket, atomic equipment and electronic industries are produced by vacuum induction melting furnace. For example, when the nickel base, cobalt base and iron base superalloys are smelted by vacuum induction melting furnace, their thermal and mechanical properties are significantly improved. Like stainless steel, heat-resistant steel, ultra-high strength steel, tool steel, bearing steel, as well as magnetic materials, elastic alloys, expansion alloys, almost all use vacuum induction melting furnace to melt, in order to ensure material properties and quality.
Technical parameters of vacuum induction melting furnace:
Product Name | 10 kg 2000 degrees vacuum induction melting furnace |
Product Model | CY-IH700-80KW-2000℃-SS |
Inductio n power supply | Frequency | 5-30kHz |
Vacuum chamber | Chamber material | #304 stainless steel |
Cavity size | Φ 700*600mm |
Cooling system | Includes water-cooled electrode, water-coo led chamber, water-cooled mold There is a water-cooled interlayer in the cavity, and the surface temperature of the insu lation cavity is lower than 35℃ when the equipment is working |
Viewing Window | Main viewing window diameter φ120mm |
Lifting platform | 0 ~ 40mm lifting range |
Accessories with | Infrared thermometer vacuum funnel |
| Water cooling interf ace | Φ10mm quick connector plug |
Vacuum connector | CF160 |
Exhaust port | KF25 |
Molecular pump | CY-1200 |
Front pump | Rotary vane pump VRD-16 |
Ultimate vacuum | 1.0 e-3 Pa |
| Vacuum System | Molecular pump: 1200L/S Rotary vane pump: 4.4L/S |
Vacuum measurement | Composite vacuum gauge |
Power Supply | AC 380V 50/60Hz |
Pouring system | The equipment has a pouring device, which can pour the melted s ample into the prepared ingot mold and pour it into the desired s hape of the sample Size of pouring abrasive: I.D.100 mm x 160mmH， |
Gas flowmeter system | 1 channel N2 or Ar, range: 0-500sccm (Support add and range option) |
Crucible | Graphite crucible sleeve | Max support size I.D.100 mm x 160mm H; Could support I.D. 120*160mm H |
Inductio n heating system | 45KW induction power supply with time controller and power con Troller Water cooler: 58L/min Induction coil: inner diameter 150mm; Height: 210mm |
Temperature control system | Temperature control system with overtemperature protection. Select infrared sensor, the test temperature can reach 2000℃. |
Feed Can | Included, the feeding method can be manual or automatic |
Other | Supply voltage | Three-phase 380V |
Total power | 80 KW |
Total dimensions | 1552*1400*1567mm (l*w*h) |
Total weight | 1400 kg |
